 |
| Category >>
Delay
|
| dynamicEchoFree |
The result is an organic delay that reacts musically to the intensity of the signal —
producing clean transients and expressive echoes that evolve with the dynamics
of the performance.
Main Architecture
Compressor / Gain Reduction Detector
Dynamic Delay Engine
GR Link Controls
Filtering and Mix Section
Visual Monitoring
Together these sections allow the delay to adapt its behavior in real time
to the incoming signal dynamics
|
|
|
 |
| Category >>
Delay
|
| dynamicEcho |
The result is an organic delay that reacts musically to the intensity of the signal —
producing clean transients and expressive echoes that evolve with the dynamics
of the performance.
Main Architecture
Compressor / Gain Reduction Detector
Dynamic Delay Engine
GR Link Controls
Filtering and Mix Section
Visual Monitoring
Together these sections allow the delay to adapt its behavior in real time
to the incoming signal dynamics
|
|
|
 |
| Category >>
Distortion
|
| yCompressor |
mic) – selects how the input signal level is detected
Attack – controls how fast the compressor responds to transients
Release – defines how quickly gain reduction is released
Ratio – determines the amount of compression applied
Stereo – controls stereo channel linking and behavior
Gain – output level compensation
Mix – dry/wet balance for parallel compression
Side Chain – enables compression triggered by an external or filtered signal
Design Philosophy
yCompressor is built around the idea of doing exactly what is needed—and
|
|
|
 |
| Category >>
Therapy
|
| binauralBeatsHarmonics |
Labels where the frequencies can be viewed for each ear. If more frequencies are active, you can press on an active slot in zone 16 to view the respective frequencies.
Brainwave range frequencies.
Label indicating what the frequencies represent in area 16 of slots.
From here you can link the frequencies in area 16 to the frequency of reference. Suppose we raise the reference frequency. In the second position of 12 frequencies grow but jumping down when the ratios between the values from row of slots and the frequency of reference match the multiple of two. In the last position
|
|
|
 |
| Category >>
Delay
|
| sweepDelay |
Extremely low resources taken!
Use sweepDelay if you want your delay to sound special.
Features:
Two
resonant filters that are modulated in frequency, one on each channel.
Lowpass and highpass
filters.
Link for modulation to Pan Width, Feedback, Dry and Wet Mix.
Visual modulation position.
Host sync delay rate.
Rich rates: triplet and dotted.
Auto bypass when no input signal.
Ping pong, delay play on alternate left-right.
Ping pong rates enhanced: normal
|
|
|
 |
| Category >>
Distortion
|
| easyGater |
High Gain and oscillations between Low and High. You can also set the frequency that split the Low and High frequencies values
You can change the global time for all steps. You can to lock the steps set as tie so that the decrease of the global time gate does not decrease the time for the tie(link) steps.
You can change the values of the steps globally as time (blue arrows on the left) and as volume (green arrows on the right).
Few presets useful for a few musical genres: Trance, House, Groove.
Tips:
Value input from keyboard: go over the knob and right click
|
|
|
 |
| Category >>
Mastering
|
| easyLimiter |
easyLimiter for easy mastering. Output audio limiting, stereo link, release of attenuation and few type of limiting. Show maximum attenuation.
All what you need to clean disturbing sounds.
Made based on our research in the field of wave attenuation of high peak that creates problems audition
|
|
|
 |
| Category >>
Mastering
|
| SLimiterPro |
This feature detects all peaks in time to can be limited.
Attack attenuation envelope. This feature make continuous sound and very close to the original line.
Release attenuation envelope. This feature improves continuous line of the sound.
Stereo link combines attenuation with stereo balance.
Left and right attenuation with memory storing.
Peaks graphic for output and input/attenuation
Clipping soft and hard
Instant and maximum RMS
Free for 60 seconds.
Requirements:
DAW (VST host)
|
|
|
 |
| Category >>
Mastering
|
| SLimiter |
This feature detects all peaks in time to can be limited.
Attack attenuation envelope. This feature make continuous sound and very close to the original line.
Release attenuation envelope. This feature improves continuous line of the sound.
Stereo link combines attenuation with stereo balance.
Left and right attenuation with memory storing.
Free for 60 seconds.
Requirements:
DAW (VST host), Windows 32/64bits or MacOS VST and AU
Changelog:
3.2 (2023-05-12)
UPDATE: change values by mouse wheel
|
|
|
|
|
3LufsMeter
